import xarray
import numpy
[docs]def find_transect_levels_and_weights(dsTransect, layerThickness, bottomDepth,
maxLevelCell, zTransect=None):
"""
Construct a vertical coordinate for a transect produced by
``mpas_tools.viz.transects.find_transect_cells_and_weights()``, then break
each resulting quadrilateral into 2 triangles that can later be visualized
with functions like ``tripcolor`` and ``tricontourf``. Also, compute
interpolation weights such that observations at points on the original
transect and with vertical coordinate ``transectZ`` can be bilinearly
interpolated to the nodes of the transect.
Parameters
----------
dsTransect : xarray.Dataset
A dataset that defines nodes of the transect, the results of calling
``find_transect_cells_and_weights()``
layerThickness : xarray.DataArray
layer thicknesses on the MPAS mesh
bottomDepth : xarray.DataArray
the (positive down) depth of the seafloor on the MPAS mesh
maxLevelCell : xarray.DataArray
the vertical zero-based index of the bathymetry on the MPAS mesh
zTransect : xarray.DataArray, optional
the z coordinate of the transect (1D or 2D). If 2D, it must have the
same along-transect dimension as the lon and lat passed to
``find_transect_cells_and_weights()``
Returns
-------
dsTransectTriangles : xarray.Dataset
A dataset that contains nodes and triangles that make up a 2D transect.
For convenience in visualization, the quadrilaterals of each cell making
up the transect have been divided into an upper and lower triangle. The
nodes of the triangles are completely independent of one another,
allowing for potential jumps in fields values between nodes of different
triangles that are at the same location. This is convenient, for
example, when visualizing data with constant values within each MPAS
cell.
There are ``nTransectTriangles = 2*nTransectCells`` triangles, each with
``nTriangleNodes = 3`` nodes, where ``nTransectCells`` is the number of
valid transect cells (quadrilaterals) that are above the MPAS-Ocean
bathymetry.
In addition to the variables and coordinates in ``dsTransect``, the
output dataset contains:
- nodeHorizBoundsIndices: which of the ``nHorizBounds = 2``
bounds of a horizontal transect segment a given node is on
- segmentIndices: the transect segment of a given triangle
- cellIndices: the MPAS-Ocean cell of a given triangle
- levelIndices: the MPAS-Ocean vertical level of a given triangle
- zTransectNode: the vertical height of each triangle node
- ssh, zSeaFloor: the sea-surface height and sea-floor height at
each node of each transect segment
- interpCellIndices, interpLevelIndices: the MPAS-Ocean cells and
levels from which the value at a given triangle node are
interpolated. This can involve up to ``nWeights = 12`` different
cells and levels.
- interpCellWeights: the weight to multiply each field value by
to perform interpolation to a triangle node.
- transectInterpVertIndices, transectInterpVertWeights - if
``zTransect`` is not ``None``, vertical indices and weights for
interpolating from the original transect grid to MPAS-Ocean
transect nodes.
Interpolation of a DataArray from MPAS cells and levels to transect
triangle nodes can be performed with
``interp_mpas_to_transect_triangle_nodes()``. Similarly, interpolation of a
DataArray (e.g. an observation) from the original transect grid to
transect triangle nodes can be performed with
``interp_transect_grid_to_transect_triangle_nodes()``
To visualize constant values on MPAS cells, a field can be sampled
at indices ``nCells=cellIndices`` and ``nVertLevels=levelIndices``.
If a smoother visualization is desired, bilinear interpolation can be
performed by first sampling the field at indices
``nCells=interpCellIndices`` and ``nVertLevels=interpLevelIndices`` and
then multiplying by ``interpCellWeights`` and summing over
``nWeights``.
"""
dsTransectCells = _get_transect_cells_and_nodes(
dsTransect, layerThickness, bottomDepth, maxLevelCell)
dsTransectTriangles = _transect_cells_to_triangles(dsTransectCells)
if zTransect is not None:
dsTransectTriangles = _add_vertical_interpolation_of_transect_points(
dsTransectTriangles, zTransect)
return dsTransectTriangles
[docs]def interp_mpas_to_transect_triangles(dsTransectTriangles, da):
"""
Interpolate a 3D (``nCells`` by ``nVertLevels``) MPAS-Ocean DataArray
to transect nodes with constant values in each MPAS cell
Parameters
----------
dsTransectTriangles : xarray.Dataset
A dataset that defines triangles making up an MPAS-Ocean transect, the
results of calling ``find_transect_levels_and_weights()``
da : xarray.DataArray
An MPAS-Ocean 3D field with dimensions `nCells`` and ``nVertLevels``
(possibly among others)
Returns
-------
daNodes : xarray.DataArray
The data array interpolated to transect nodes with dimensions
``nTransectTriangles`` and ``nTriangleNodes`` (in addition to whatever
dimensions were in ``da`` besides ``nCells`` and ``nVertLevels``)
"""
cellIndices = dsTransectTriangles.cellIndices
levelIndices = dsTransectTriangles.levelIndices
daNodes = da.isel(nCells=cellIndices, nVertLevels=levelIndices)
return daNodes
[docs]def interp_mpas_to_transect_triangle_nodes(dsTransectTriangles, da):
"""
Interpolate a 3D (``nCells`` by ``nVertLevels``) MPAS-Ocean DataArray
to transect nodes, linearly interpolating fields between the closest
neighboring cells
Parameters
----------
dsTransectTriangles : xarray.Dataset
A dataset that defines triangles making up an MPAS-Ocean transect, the
results of calling ``find_transect_levels_and_weights()``
da : xarray.DataArray
An MPAS-Ocean 3D field with dimensions `nCells`` and ``nVertLevels``
(possibly among others)
Returns
-------
daNodes : xarray.DataArray
The data array interpolated to transect nodes with dimensions
``nTransectTriangles`` and ``nTriangleNodes`` (in addition to whatever
dimensions were in ``da`` besides ``nCells`` and ``nVertLevels``)
"""
interpCellIndices = dsTransectTriangles.interpCellIndices
interpLevelIndices = dsTransectTriangles.interpLevelIndices
interpCellWeights = dsTransectTriangles.interpCellWeights
da = da.isel(nCells=interpCellIndices, nVertLevels=interpLevelIndices)
daNodes = (da*interpCellWeights).sum(dim='nWeights')
return daNodes
[docs]def interp_transect_grid_to_transect_triangle_nodes(dsTransectTriangles, da):
"""
Interpolate a DataArray on the original transect grid to triangle nodes on
the MPAS-Ocean transect.
Parameters
----------
dsTransectTriangles : xarray.Dataset
A dataset that defines triangles making up an MPAS-Ocean transect, the
results of calling ``find_transect_levels_and_weights()``
da : xarray.DataArray
An field on the original triangle mesh
Returns
-------
daNodes : xarray.DataArray
The data array interpolated to transect nodes with dimensions
``nTransectTriangles`` and ``nTriangleNodes``
"""
horizDim = dsTransectTriangles.dTransect.dims[0]
zTransect = dsTransectTriangles.zTransect
vertDim = None
for dim in zTransect.dims:
if dim != horizDim:
vertDim = dim
horizIndices = dsTransectTriangles.transectIndicesOnHorizNode
horizWeights = dsTransectTriangles.transectWeightsOnHorizNode
segmentIndices = dsTransectTriangles.segmentIndices
nodeHorizBoundsIndices = dsTransectTriangles.nodeHorizBoundsIndices
horizIndices = horizIndices.isel(nSegments=segmentIndices,
nHorizBounds=nodeHorizBoundsIndices)
horizWeights = horizWeights.isel(nSegments=segmentIndices,
nHorizBounds=nodeHorizBoundsIndices)
vertIndices = dsTransectTriangles.transectInterpVertIndices
vertWeights = dsTransectTriangles.transectInterpVertWeights
kwargs00 = {horizDim: horizIndices, vertDim: vertIndices}
kwargs01 = {horizDim: horizIndices, vertDim: vertIndices+1}
kwargs10 = {horizDim: horizIndices+1, vertDim: vertIndices}
kwargs11 = {horizDim: horizIndices+1, vertDim: vertIndices+1}
daNodes = (horizWeights * vertWeights * da.isel(**kwargs00) +
horizWeights * (1.0 - vertWeights) * da.isel(**kwargs01) +
(1.0 - horizWeights) * vertWeights * da.isel(**kwargs10) +
(1.0 - horizWeights) * (1.0 - vertWeights) * da.isel(**kwargs11))
mask = numpy.logical_and(horizIndices != -1, vertIndices != -1)
daNodes = daNodes.where(mask)
return daNodes
[docs]def get_outline_segments(dsTransectTriangles, epsilon=1e-3):
"""Get a set of line segments that outline the given transect"""
nSegments = dsTransectTriangles.sizes['nSegments']
dSeaFloor = dsTransectTriangles.dNode.values
zSeaFloor = dsTransectTriangles.zSeaFloor.values
ssh = dsTransectTriangles.ssh.values
seaFloorJumps = numpy.abs(dSeaFloor[0:-1, 1] - dSeaFloor[1:, 0]) < epsilon
nSeaFloorJumps = numpy.count_nonzero(seaFloorJumps)
nSurface = nSegments
nSeaFloor = nSegments + nSeaFloorJumps
nLandJumps = nSegments - nSeaFloorJumps
nOutline = nSurface + nSeaFloor + 2*nLandJumps
d = numpy.zeros((nOutline, 2))
z = numpy.zeros((nOutline, 2))
d[0:nSegments, :] = dSeaFloor
z[0:nSegments, :] = ssh
d[nSegments:2*nSegments, :] = dSeaFloor
z[nSegments:2*nSegments, :] = zSeaFloor
dSeaFloorJump = numpy.vstack((dSeaFloor[0:-1, 1], dSeaFloor[1:, 0])).T
zSeaFloorJump = numpy.vstack((zSeaFloor[0:-1, 1], zSeaFloor[1:, 0])).T
slc = slice(2*nSegments, 2*nSegments+nSeaFloorJumps)
d[slc, :] = dSeaFloorJump[seaFloorJumps, :]
z[slc, :] = zSeaFloorJump[seaFloorJumps, :]
landJumps1 = numpy.ones(nSegments, bool)
landJumps1[1:] = numpy.logical_not(seaFloorJumps)
landJumps2 = numpy.ones(nSegments, bool)
landJumps2[0:-1] = numpy.logical_not(seaFloorJumps)
offset = 2*nSegments+nSeaFloorJumps
slc = slice(offset, offset + nLandJumps)
d[slc, 0] = dSeaFloor[landJumps1, 0]
d[slc, 1] = dSeaFloor[landJumps1, 0]
z[slc, 0] = ssh[landJumps1, 0]
z[slc, 1] = zSeaFloor[landJumps1, 0]
offset = 2*nSegments+nSeaFloorJumps+nLandJumps
slc = slice(offset, offset + nLandJumps)
d[slc, 0] = dSeaFloor[landJumps2, 1]
d[slc, 1] = dSeaFloor[landJumps2, 1]
z[slc, 0] = ssh[landJumps2, 1]
z[slc, 1] = zSeaFloor[landJumps2, 1]
d = d.T
z = z.T
return d, z
def _get_transect_cells_and_nodes(dsTransect, layerThickness, bottomDepth,
maxLevelCell):
if 'Time' in layerThickness.dims:
raise ValueError('Please select a single time level in layerThickness.')
dsTransect = dsTransect.rename({'nBounds': 'nHorizBounds'})
zTop, zMid, zBot, ssh, zSeaFloor, interpCellIndices, interpCellWeights = \
_get_vertical_coordinate(dsTransect, layerThickness, bottomDepth,
maxLevelCell)
nVertLevels = layerThickness.sizes['nVertLevels']
levelIndices = xarray.DataArray(data=numpy.arange(2*nVertLevels)//2,
dims='nHalfLevels')
cellMask = (levelIndices <= maxLevelCell).transpose('nCells', 'nHalfLevels')
dsTransectCells = _add_valid_cells_and_levels(
dsTransect, dsTransect.horizCellIndices.values, levelIndices.values,
cellMask.values)
# transect cells are made up of half-levels, and each half-level has a top
# and bottom interface, so we need 4 interfaces per MPAS level
interpCellIndices, interpLevelIndices, interpCellWeights = \
_get_interp_indices_and_weights(layerThickness, maxLevelCell,
interpCellIndices, interpCellWeights)
levelIndex, tempIndex = numpy.meshgrid(numpy.arange(nVertLevels),
numpy.arange(2), indexing='ij')
levelIndex = xarray.DataArray(data=levelIndex.ravel(), dims='nHalfLevels')
tempIndex = xarray.DataArray(data=tempIndex.ravel(), dims='nHalfLevels')
zTop = xarray.concat((zTop, zMid), dim='nTemp')
zTop = zTop.isel(nVertLevels=levelIndex, nTemp=tempIndex)
zBot = xarray.concat((zMid, zBot), dim='nTemp')
zBot = zBot.isel(nVertLevels=levelIndex, nTemp=tempIndex)
zInterface = xarray.concat((zTop, zBot), dim='nVertBounds')
segmentIndices = dsTransectCells.segmentIndices
halfLevelIndices = dsTransectCells.halfLevelIndices
dsTransectCells['interpCellIndices'] = interpCellIndices.isel(
nSegments=segmentIndices, nHalfLevels=halfLevelIndices)
dsTransectCells['interpLevelIndices'] = interpLevelIndices.isel(
nSegments=segmentIndices, nHalfLevels=halfLevelIndices)
dsTransectCells['interpCellWeights'] = interpCellWeights.isel(
nSegments=segmentIndices, nHalfLevels=halfLevelIndices)
dsTransectCells['zTransectNode'] = zInterface.isel(
nSegments=segmentIndices, nHalfLevels=halfLevelIndices)
dsTransectCells['ssh'] = ssh
dsTransectCells['zSeaFloor'] = zSeaFloor
dims = ['nSegments', 'nTransectCells', 'nHorizBounds', 'nVertBounds',
'nHorizWeights', 'nWeights']
for dim in dsTransectCells.dims:
if dim not in dims:
dims.insert(0, dim)
dsTransectCells = dsTransectCells.transpose(*dims)
return dsTransectCells
def _get_vertical_coordinate(dsTransect, layerThickness, bottomDepth,
maxLevelCell):
nVertLevels = layerThickness.sizes['nVertLevels']
levelIndices = xarray.DataArray(data=numpy.arange(nVertLevels),
dims='nVertLevels')
cellMask = (levelIndices <= maxLevelCell).transpose('nCells', 'nVertLevels')
ssh = -bottomDepth + layerThickness.sum(dim='nVertLevels')
interpCellIndices = dsTransect.interpHorizCellIndices
interpCellWeights = dsTransect.interpHorizCellWeights
interpMask = numpy.logical_and(interpCellIndices > 0,
cellMask.isel(nCells=interpCellIndices))
interpCellWeights = interpMask*interpCellWeights
weightSum = interpCellWeights.sum(dim='nHorizWeights')
cellIndices = dsTransect.horizCellIndices
validCells = cellMask.isel(nCells=cellIndices)
_, validWeights = xarray.broadcast(interpCellWeights, validCells)
interpCellWeights = (interpCellWeights/weightSum).where(validWeights)
layerThicknessTransect = layerThickness.isel(nCells=interpCellIndices)
layerThicknessTransect = (layerThicknessTransect*interpCellWeights).sum(
dim='nHorizWeights')
sshTransect = ssh.isel(nCells=interpCellIndices)
sshTransect = (sshTransect*dsTransect.interpHorizCellWeights).sum(
dim='nHorizWeights')
zBot = sshTransect - layerThicknessTransect.cumsum(dim='nVertLevels')
zTop = zBot + layerThicknessTransect
zMid = 0.5*(zTop + zBot)
zSeaFloor = sshTransect - layerThicknessTransect.sum(dim='nVertLevels')
return zTop, zMid, zBot, sshTransect, zSeaFloor, interpCellIndices, \
interpCellWeights
def _add_valid_cells_and_levels(dsTransect, cellIndices, levelIndices,
cellMask):
dims = ('nTransectCells',)
CellIndices, LevelIndices = numpy.meshgrid(cellIndices, levelIndices,
indexing='ij')
mask = numpy.logical_and(CellIndices >= 0, cellMask[cellIndices, :])
SegmentIndices, HalfLevelIndices = \
numpy.meshgrid(numpy.arange(len(cellIndices)),
numpy.arange(len(levelIndices)), indexing='ij')
segmentIndices = xarray.DataArray(data=SegmentIndices[mask], dims=dims)
dsTransectCells = dsTransect
dsTransectCells['cellIndices'] = (dims, CellIndices[mask])
dsTransectCells['levelIndices'] = (dims, LevelIndices[mask])
dsTransectCells['segmentIndices'] = segmentIndices
dsTransectCells['halfLevelIndices'] = (dims, HalfLevelIndices[mask])
return dsTransectCells
def _get_interp_indices_and_weights(layerThickness, maxLevelCell,
interpCellIndices, interpCellWeights):
interpCellIndices = interpCellIndices.rename({'nHorizWeights': 'nWeights'})
interpCellWeights = interpCellWeights.rename({'nHorizWeights': 'nWeights'})
nVertLevels = layerThickness.sizes['nVertLevels']
nHalfLevels = 2*nVertLevels
nVertBounds = 2
interpMaxLevelCell = maxLevelCell.isel(nCells=interpCellIndices)
levelIndices = xarray.DataArray(
data=numpy.arange(nHalfLevels)//2, dims='nHalfLevels')
valid = levelIndices <= interpMaxLevelCell
topLevelIndices = -1*numpy.ones((nHalfLevels, nVertBounds), int)
topLevelIndices[1:, 0] = numpy.arange(nHalfLevels-1)//2
topLevelIndices[:, 1] = numpy.arange(nHalfLevels)//2
topLevelIndices = xarray.DataArray(
data=topLevelIndices, dims=('nHalfLevels', 'nVertBounds'))
interpCellIndices, topLevelIndices = \
xarray.broadcast(interpCellIndices, topLevelIndices)
topLevelIndices = topLevelIndices.where(valid, -1)
botLevelIndices = numpy.zeros((nHalfLevels, nVertBounds), int)
botLevelIndices[:, 0] = numpy.arange(nHalfLevels)//2
botLevelIndices[:, 1] = numpy.arange(1, nHalfLevels+1)//2
botLevelIndices = xarray.DataArray(
data=botLevelIndices, dims=('nHalfLevels', 'nVertBounds'))
_, botLevelIndices = xarray.broadcast(interpCellIndices, botLevelIndices)
botLevelIndices = botLevelIndices.where(valid, -1)
botLevelIndices = numpy.minimum(botLevelIndices, interpMaxLevelCell)
interpLevelIndices = xarray.concat((topLevelIndices, botLevelIndices),
dim='nWeights')
topHalfLevelThickness = 0.5*layerThickness.isel(
nCells=interpCellIndices, nVertLevels=topLevelIndices)
topHalfLevelThickness = topHalfLevelThickness.where(topLevelIndices >= 0,
other=0.)
botHalfLevelThickness = 0.5*layerThickness.isel(
nCells=interpCellIndices, nVertLevels=botLevelIndices)
# vertical weights are proportional to the half-level thickness
interpCellWeights = xarray.concat(
(topHalfLevelThickness*interpCellWeights.isel(nVertLevels=topLevelIndices),
botHalfLevelThickness*interpCellWeights.isel(nVertLevels=botLevelIndices)),
dim='nWeights')
weightSum = interpCellWeights.sum(dim='nWeights')
_, outMask = xarray.broadcast(interpCellWeights, weightSum > 0.)
interpCellWeights = (interpCellWeights/weightSum).where(outMask)
interpCellIndices = xarray.concat((interpCellIndices, interpCellIndices),
dim='nWeights')
return interpCellIndices, interpLevelIndices, interpCellWeights
def _transect_cells_to_triangles(dsTransectCells):
nTransectCells = dsTransectCells.sizes['nTransectCells']
nTransectTriangles = 2*nTransectCells
triangleTransectCellIndices = numpy.arange(nTransectTriangles)//2
nodeTransectCellIndices = numpy.zeros((nTransectTriangles, 3), int)
nodeHorizBoundsIndices = numpy.zeros((nTransectTriangles, 3), int)
nodeVertBoundsIndices = numpy.zeros((nTransectTriangles, 3), int)
for index in range(3):
nodeTransectCellIndices[:, index] = triangleTransectCellIndices
# the upper triangle
nodeHorizBoundsIndices[0::2, 0] = 0
nodeVertBoundsIndices[0::2, 0] = 0
nodeHorizBoundsIndices[0::2, 1] = 1
nodeVertBoundsIndices[0::2, 1] = 0
nodeHorizBoundsIndices[0::2, 2] = 0
nodeVertBoundsIndices[0::2, 2] = 1
# the lower triangle
nodeHorizBoundsIndices[1::2, 0] = 0
nodeVertBoundsIndices[1::2, 0] = 1
nodeHorizBoundsIndices[1::2, 1] = 1
nodeVertBoundsIndices[1::2, 1] = 0
nodeHorizBoundsIndices[1::2, 2] = 1
nodeVertBoundsIndices[1::2, 2] = 1
triangleTransectCellIndices = xarray.DataArray(
data=triangleTransectCellIndices, dims='nTransectTriangles')
nodeTransectCellIndices = xarray.DataArray(
data=nodeTransectCellIndices,
dims=('nTransectTriangles', 'nTriangleNodes'))
nodeHorizBoundsIndices = xarray.DataArray(
data=nodeHorizBoundsIndices,
dims=('nTransectTriangles', 'nTriangleNodes'))
nodeVertBoundsIndices = xarray.DataArray(
data=nodeVertBoundsIndices,
dims=('nTransectTriangles', 'nTriangleNodes'))
dsTransectTriangles = xarray.Dataset()
dsTransectTriangles['nodeHorizBoundsIndices'] = \
nodeHorizBoundsIndices
for var_name in dsTransectCells.data_vars:
var = dsTransectCells[var_name]
if 'nTransectCells' in var.dims:
if 'nVertBounds' in var.dims:
assert 'nHorizBounds' in var.dims
dsTransectTriangles[var_name] = var.isel(
nTransectCells=nodeTransectCellIndices,
nHorizBounds=nodeHorizBoundsIndices,
nVertBounds=nodeVertBoundsIndices)
elif 'nHorizBounds' in var.dims:
dsTransectTriangles[var_name] = var.isel(
nTransectCells=nodeTransectCellIndices,
nHorizBounds=nodeHorizBoundsIndices)
else:
dsTransectTriangles[var_name] = var.isel(
nTransectCells=triangleTransectCellIndices)
else:
dsTransectTriangles[var_name] = var
dsTransectTriangles = dsTransectTriangles.drop_vars('halfLevelIndices')
return dsTransectTriangles
def _add_vertical_interpolation_of_transect_points(dsTransectTriangles,
zTransect):
dTransect = dsTransectTriangles.dTransect
# make sure zTransect is 2D
zTransect, _ = xarray.broadcast(zTransect, dTransect)
assert len(zTransect.dims) == 2
horizDim = dTransect.dims[0]
vertDim = None
for dim in zTransect.dims:
if dim != horizDim:
vertDim = dim
assert vertDim is not None
nzTransect = zTransect.sizes[vertDim]
horizIndices = dsTransectTriangles.transectIndicesOnHorizNode
horizWeights = dsTransectTriangles.transectWeightsOnHorizNode
kwargs0 = {horizDim: horizIndices}
kwargs1 = {horizDim: horizIndices+1}
zTransectAtHorizNodes = horizWeights*zTransect.isel(**kwargs0) + \
(1.0 - horizWeights)*zTransect.isel(**kwargs1)
zTriangleNode = dsTransectTriangles.zTransectNode
segmentIndices = dsTransectTriangles.segmentIndices
nodeHorizBoundsIndices = dsTransectTriangles.nodeHorizBoundsIndices
nTransectTriangles = dsTransectTriangles.sizes['nTransectTriangles']
nTriangleNodes = dsTransectTriangles.sizes['nTriangleNodes']
transectInterpVertIndices = -1*numpy.ones(
(nTransectTriangles, nTriangleNodes), int)
transectInterpVertWeights = numpy.zeros(
(nTransectTriangles, nTriangleNodes))
kwargs = {vertDim: 0, 'nSegments': segmentIndices,
'nHorizBounds': nodeHorizBoundsIndices}
z0 = zTransectAtHorizNodes.isel(**kwargs)
for zIndex in range(nzTransect-1):
kwargs = {vertDim: zIndex+1, 'nSegments': segmentIndices,
'nHorizBounds': nodeHorizBoundsIndices}
z1 = zTransectAtHorizNodes.isel(**kwargs)
mask = numpy.logical_and(zTriangleNode <= z0, zTriangleNode > z1)
mask = mask.values
weights = (z1 - zTriangleNode)/(z1 - z0)
transectInterpVertIndices[mask] = zIndex
transectInterpVertWeights[mask] = weights.values[mask]
z0 = z1
dsTransectTriangles['transectInterpVertIndices'] = (
('nTransectTriangles', 'nTriangleNodes'), transectInterpVertIndices)
dsTransectTriangles['transectInterpVertWeights'] = (
('nTransectTriangles', 'nTriangleNodes'), transectInterpVertWeights)
dsTransectTriangles['zTransect'] = zTransect
return dsTransectTriangles