# This software is open source software available under the BSD-3 license.
#
# Copyright (c) 2019 Triad National Security, LLC. All rights reserved.
# Copyright (c) 2019 Lawrence Livermore National Security, LLC. All rights
# reserved.
# Copyright (c) 2019 UT-Battelle, LLC. All rights reserved.
#
# Additional copyright and license information can be found in the LICENSE file
# distributed with this code, or at
# https://raw.githubusercontent.com/MPAS-Dev/MPAS-Analysis/master/LICENSE
from __future__ import absolute_import, division, print_function, \
unicode_literals
from mpas_analysis.shared import AnalysisTask
from mpas_analysis.shared.climatology import RemapMpasClimatologySubtask
from mpas_analysis.ocean.plot_climatology_map_subtask import \
PlotClimatologyMapSubtask
[docs]class ClimatologyMapMLDMinMax(AnalysisTask): # {{{
"""
An analysis task for comparison of mixed layer depth (mld) against
observations
"""
# Authors
# -------
# Luke Van Roekel, Xylar Asay-Davis, Milena Veneziani
[docs] def __init__(self, config, mpasClimatologyTasks, controlConfig=None):
# {{{
"""
Construct the analysis task.
Parameters
----------
config : ``MpasAnalysisConfigParser``
Configuration options
mpasClimatologyTasks : dict of ``MpasClimatologyTask``
The tasks that produced the climatology of monthly min and max to
be remapped and plotted
controlConfig : ``MpasAnalysisConfigParser``, optional
Configuration options for a control run (if any)
"""
# Authors
# -------
# Xylar Asay-Davis
fieldName = 'mld'
# call the constructor from the base class (AnalysisTask)
super(ClimatologyMapMLDMinMax, self).__init__(
config=config, taskName='climatologyMapMLDMinMax',
componentName='ocean',
tags=['climatology', 'horizontalMap', fieldName, 'publicObs',
'min', 'max'])
self._add_tasks(config, mpasClimatologyTasks, controlConfig,
title='Density MLD',
mpasVariableSuffix='dThreshMLD',
filePrefix='d_mld',
sectionPrefix='climatologyMapDensityMLD')
self._add_tasks(config, mpasClimatologyTasks, controlConfig,
title='Temperature MLD',
mpasVariableSuffix='tThreshMLD',
filePrefix='t_mld',
sectionPrefix='climatologyMapTemperatureMLD')
self._add_tasks(config, mpasClimatologyTasks, controlConfig,
title='Boundary-Layer Depth',
mpasVariableSuffix='boundaryLayerDepth',
filePrefix='bld',
sectionPrefix='climatologyMapBLD')
# }}}
def setup_and_check(self): # {{{
'''
Check if MLD capability was turned on in the run.
'''
# Authors
# -------
# Xylar Asay-Davis
# first, call setup_and_check from the base class (AnalysisTask),
# which will perform some common setup, including storing:
# self.runDirectory , self.historyDirectory, self.plotsDirectory,
# self.namelist, self.runStreams, self.historyStreams,
# self.calendar
super(ClimatologyMapMLDMinMax, self).setup_and_check()
self.check_analysis_enabled(
analysisOptionName='config_am_mixedlayerdepths_enable',
raiseException=True)
self.check_analysis_enabled(
analysisOptionName='config_AM_timeSeriesStatsMonthlyMin_enable',
raiseException=True)
self.check_analysis_enabled(
analysisOptionName='config_AM_timeSeriesStatsMonthlyMax_enable',
raiseException=True)
# }}}
def _add_tasks(self, config, mpasClimatologyTasks, controlConfig,
title, mpasVariableSuffix, filePrefix, sectionPrefix):
'''
Add tasks for a given variable
'''
iselValues = None
# read in what seasons we want to plot
seasons = config.getExpression(self.taskName, 'seasons')
if len(seasons) == 0:
raise ValueError('config section {} does not contain valid list '
'of seasons'.format(self.taskName))
comparisonGridNames = config.getExpression(self.taskName,
'comparisonGrids')
if len(comparisonGridNames) == 0:
raise ValueError('config section {} does not contain valid list '
'of comparison grids'.format(self.taskName))
remapClimatologySubtasks = {}
mpasFieldNames = {}
for op in ['min', 'max']:
upperOp = op[0].upper() + op[1:]
mpasFieldNames[op] = 'timeMonthly{}_{}_{}'.format(
upperOp, op, mpasVariableSuffix)
# the variable 'timeMonthly_avg_dThreshMLD' will be added to
# mpasClimatologyTask along with the seasons.
remapClimatologySubtasks[op] = RemapMpasClimatologySubtask(
mpasClimatologyTask=mpasClimatologyTasks[op],
parentTask=self,
climatologyName=filePrefix,
variableList=[mpasFieldNames[op]],
comparisonGridNames=comparisonGridNames,
seasons=seasons,
iselValues=iselValues,
subtaskName='remap{}_{}'.format(upperOp, filePrefix))
if controlConfig is None:
fieldNameInTitle = 'Max {}'.format(title)
refTitleLabel = 'Min {}'.format(title)
diffTitleLabel = 'Max - Min {}'.format(title)
galleryName = title
outFileLabel = '{}_min_max'.format(filePrefix)
sectionName = '{}MinMax'.format(sectionPrefix)
for comparisonGridName in comparisonGridNames:
for season in seasons:
subtaskName = 'plot_{}_{}_{}'.format(filePrefix,
season,
comparisonGridName)
# make a new subtask for this season and comparison grid
firstTask = remapClimatologySubtasks['max']
secondTask = remapClimatologySubtasks['min']
subtask = PlotClimatologyMapSubtask(
self, season, comparisonGridName,
remapMpasClimatologySubtask=firstTask,
secondRemapMpasClimatologySubtask=secondTask,
controlConfig=controlConfig,
subtaskName=subtaskName)
subtask.set_plot_info(
outFileLabel=outFileLabel,
fieldNameInTitle=fieldNameInTitle,
mpasFieldName=mpasFieldNames['max'],
refFieldName=mpasFieldNames['min'],
refTitleLabel=refTitleLabel,
diffTitleLabel=diffTitleLabel,
unitsLabel=r'm',
imageCaption='Min/Max Mixed-Layer Depth',
galleryGroup='Min/Max Mixed-Layer Depth',
groupSubtitle=None,
groupLink='mld_min_max',
galleryName=galleryName,
configSectionName=sectionName)
self.add_subtask(subtask)
else:
controlRunName = controlConfig.get('runs', 'mainRunName')
galleryName = title
refTitleLabel = 'Control: {}'.format(controlRunName)
diffTitleLabel = 'Main - Control'
for comparisonGridName in comparisonGridNames:
for season in seasons:
for op in ['min', 'max']:
upperOp = op[0].upper() + op[1:]
subtaskName = 'plot{}_{}_{}_{}'.format(
upperOp, filePrefix, season, comparisonGridName)
fieldNameInTitle = '{} {}'.format(upperOp, title)
outFileLabel = '{}_{}'.format(filePrefix, op)
sectionName = '{}{}'.format(sectionPrefix, upperOp)
# make a new subtask for this season and comparison
# grid
subtask = PlotClimatologyMapSubtask(
self, season, comparisonGridName,
remapClimatologySubtasks[op],
controlConfig=controlConfig,
subtaskName=subtaskName)
subtask.set_plot_info(
outFileLabel=outFileLabel,
fieldNameInTitle=fieldNameInTitle,
mpasFieldName=mpasFieldNames[op],
refFieldName=mpasFieldNames[op],
refTitleLabel=refTitleLabel,
diffTitleLabel=diffTitleLabel,
unitsLabel=r'm',
imageCaption=fieldNameInTitle,
galleryGroup='Min/Max Mixed-Layer Depth',
groupSubtitle=None,
groupLink='mld_{}'.format(op),
galleryName=galleryName,
configSectionName=sectionName)
self.add_subtask(subtask)
# }}}
# vim: foldmethod=marker ai ts=4 sts=4 et sw=4 ft=python